Conforming to QSFP28 standards: SFF-8665 Revision 1.9, SFF-8636 Revision 2.6

The QSFP28-100G-SR4 is a four-channel, swapable, parallel, fiber QSFP28 transceiver for IEEE 802.3bm, and the 100GBASE SR4 for 40G gigabit Ethernet and unlimited band and FDR/EDR applications. The QSFP28 full-duplex optical module provides four independent transmission and reception channels, each of which can run 28Gbps, with a total data rate of 112Gbps 70m. These modules are designed to operate on a multi-mode fiber system using an 850nm VCSEL laser array. A fiber optic strip cable with an MPO/MTPTM connector can be plugged into the QSFP28 module socket. The QSFP28 SR4 is a parallel transceiver that increases port density and saves total system cost.

This product is a transceiver module designed for optical communication applications up to 40 km long. This module converts four input channels (ch) of 10Gb/s electrical data into four CWDM optical signals, and multiplexes them into a single channel to achieve 40Gb/s optical transmission. On the receiver side, instead, the module multiplexes the 40Gb/s input light into four CWDM channel signals and converts them into four channel output electrical data.

QSFP-40G-LR4: QSFP+LR4 optical transceivers are based on the Ethernet IEEE P802.3ba standard and SFF 8436 standard. The QSFP+transceiver converts four input channels of 10Gb/s electronic data into four CWDM optical signals, and multiplexes them into a single channel to achieve 40Gb/s optical transmission. On the receiver side, instead, the module optically demultiplexes the 40Gb/s input into four CWDM channel signals and converts them into four channel output electrical data. The four CWDM channels have center wavelengths of 1271, 1291, 1311, and 1331 nm, respectively, and are members of the CWDM wavelength grid defined in ITU-T G694.2.

< 1...192021...35 >