ACC&AEC Active Copper Cable Series | New Choice for Compute Interconnect: 800G OSFP112 Selection Guide


Published:

2026-10-30

Author:

ACC&AEC Active Copper Cable Series | New Choice for Compute Interconnect: 800G OSFP112 Selection Guide

The 800G compute network has entered the large-scale deployment phase. As a next-generation high-speed form factor, OSFP112 supports interconnection for high-end GPUs, switches and DPUs. Faced with the stringent signal integrity requirements of 112G PAM4, passive DACs suffer from limited reach while AOC solutions come with higher cost and power consumption. The 800G OSFP112 ACC and 800G OSFP112 AEC deliver a 3–7m inter-rack interconnect solution, supporting multiple breakout configurations to flexibly adapt to diverse network architectures.

 

800G OSFP112 ACC

Product Features 

Compliant with OSFP MSA, IEEE 802.3ck and CMIS v5.0 specifications 

26–30 AWG wire gauge options, maximum reach up to 5 meters 

Supports data rates: 8×112G NR, 8×56G HR 

Hot-pluggable, low power consumption (1.5W max per end), EMI-resistant design; available in Finned top and Flat top housing 

Operating temperature: 0°C–70°C

Applications: 800G InfiniBand / Ethernet, switches, servers, routers, supercomputing centers, cluster networks, etc.

Breakout Options: 800G OSFP112 to 2×400G OSFP112 ACC / 800G OSFP112 to 4×200G OSFP112 ACC / 800G OSFP112 to 2×400G QSFP112 ACC / 800G OSFP112 to 4×200G QSFP112 ACC

 

800G OSFP112 AEC

Product Features

Compliant with OSFP MSA, IEEE 802.3ck and CMIS specifications

 26–30 AWG wire gauge options, maximum reach up to 7 meters 

Hot-pluggable, low power consumption (10.5W per end), EMI-resistant design 

Operating temperature: 0°C–70°C

Applications: 800G InfiniBand / Ethernet, switches, servers, routers, data centers, cluster networks, etc.

Breakout Options: 800G OSFP112 to 2×400G OSFP112 AEC / 800G OSFP112 to 2×400G QSFP112 AEC / 800G OSFP112 to 4×200G QSFP112 AEC

 

ACC & AEC Selection Guide

 

800G OSFP112 ACC

800G OSFP112 AEC

Max Reach: ≤5 m

Max Reach: ≤7 m

Signal Processing: Compensates for high-frequency attenuation; jitter and noise are amplified synchronously

Signal Processing: Digital signal reconstruction, effectively eliminates jitter and noise

Power Consumption: Ultra-low power

Power Consumption: Slightly higher power

Latency Overhead: Minimal added latency

Latency Overhead: Higher added latency

Typical Scenario: Intra-rack & short inter-rack links

Typical Scenario: Longer inter-rack links

Comparison

Option 1 [Cost-Performance Priority] → ACC 

For links within 5m with simple routing. Prioritizes low power consumption and cost efficiency, ideal for AI inference clusters and supercomputing networking.

Option 2 [High Reliability Priority] → AEC 

For links within 7m with complex routing and multiple connections. Mitigates soft errors and intermittent link flapping, suitable for GPU training clusters and lossless RDMA training workloads.

Option 3 [Hybrid Deployment] → ACC + AEC 

Deploy ACC for intra-rack and short adjacent-rack links; deploy AEC for longer inter-rack training links with complicated cabling. Balances cost and cluster stability for mixed short & long reach connections.

Selection Scenarios

 

C-Flink 800G OSFP112 ACC & AEC are built with a compliant, standardized protocol design and interoperable with mainstream switches from various vendors. Full specifications support customized development. We provide precise selection based on hardware models, data center thermal conditions, link reach, workload, and expansion roadmap, helping you avoid risks such as compatibility failures, unstable operation, and excessive rework costs. We provide one-stop implementation for high-speed interconnect projects including data center expansion and AI compute cluster networking.

 

END

Consulting service