10G network - the best wiring scheme for small and medium-sized enterprises


Published:

2019-05-07

In recent years, with the rapid growth of data centers, the demand for high-performance servers is increasingly large, has been from the initial 1G, 10G, 40G to 100G, the construction of high-speed Ethernet has never stopped. C-FLINK will be from the following three 10G network scheme for your reference.

10G network - the best wiring scheme for small and medium-sized enterprises

In recent years, with the rapid growth of data centers, the demand for high-performance servers is increasingly large, has been from the initial 1G, 10G, 40G to 100G, the construction of high-speed Ethernet has never stopped. C-FLINK will be from the following three 10G network scheme for your reference.

Scheme 1:

The SFP+ optical module is a duplex LC interface that is used together with LC fiber jumpers for optical fiber wiring. It offers a wide variety of 10G Ethernet connectivity options for data centers, enterprise wiring cabinets, and service providers for transmission, typically at 850nm,1310nm, or 1550nm.

Plan 2:

10G SFP+ high-speed cables are commonly used for overhead cabling in data centers and are used to connect small access switches and servers. As a low-cost alternative to optical modules, 10G SFP+ high-speed cables are used to achieve high-speed interconnection over short distances, with low power consumption and low latency.

Plan 3:

The 10GBase-T SFP optical module uses unshielded or shielded twisted-pair cables for 10G connection at distances up to 100 meters. It is used for copper cable wiring and can be easily upgraded from 1GbE to 10GbE with 10GBase-T SFP. The 10GBASE-T SFP module is used because network cables are relatively common and cheaper than fiber jumper cables. However, if the transmission distance is greater than 100m, the fiber jumper is still used for connection.

10G SFP+ to SFP+ high-speed cable solution

The 10G SFP+ to SFP+ high-speed cable is based on the SFP+ MSA(multi-source protocol), using copper axis cables with SFP+ connectors at both ends to provide a 10-gigabit Ethernet connection between two network devices. It integrates the SFP+ connector with the copper axis cable, making it a low loss, energy efficient and low cost interconnection solution. A 10-gigabit SFP+ to SFP+ high-speed cable is available in various lengths, up to 10m. It is the best cable for 10-gigabit Ethernet connections.

Advantages of 10G SFP+ to SFP+ high-speed cables over 10 GBase-T

1. Lower latency

10G SFP+ to SFP+ high-speed cable ensures optimal optical performance and minimal signal delay. In the trend toward data centers, wired infrastructure can be supported to handle delay-sensitive applications anywhere. Comparing 10GBase-T technology to alternative SFP+ technology, it is clear that SFP+ is the technology that ensures the lowest latency and best performance in the data center.

2. Lower power consumption

10G SFP+ to SFP+ high-speed cable, reducing power consumption,SFP+ technology provides much lower power consumption than 10GBase-T technology. As the deployment of cables in the data center increases from 1000 to 10000, the cost savings become more significant and the solution becomes more economical.

As can be seen from the above, the 10G SFP+ optical module and SFP+ high-speed cable solution are more suitable for the 10G data center than the 10GASE-T SFP optical module, but the 10GbE is not the end goal. C-FLINK provides high-speed direct connection solutions for data center interconnection, especially the solution of 10G 10-gigabit SFP+ to SFP+ high-speed cable, which not only reduces power consumption, but also increases network scalability.

About us

Our company (www.c-flink.com) was founded in 2013, the production base is located in Huizhou City, which enjoys the reputation of "half city mountains and half city lakes". The company is composed of a group of teams with more than ten years' experience in high-speed cable development. Our company focuses on high-speed connection and serves big data transmission, and is a company dominated by DAC copper cable. All kinds of AOC products and data cables for supporting high-tech companies, our company set design, research and development, production and sales as one of the technology-oriented enterprises, products are widely used in Ethernet, data center, cloud computing and other big data transmission and high data computer groups, smart home and other fields, Companies adhering to the "professional, integrity, quality, innovation" purpose to provide customers with ODM and OEM services.